Heavy Hitter Titanium Direct Mount Riser

The Heavy Hitter Titanium Direct Mount Riser is a Ti-6Al-4V titanium stem riser that adds 2" of rise to 31.8mm handlebars on standard mountain bike dual crown forks. An evolution of the original Heavy Hitter riser, it delivers the same ergonomic and steering improvements in a lighter, stronger titanium construction with a jet wash finish.

Fitment:

• Sur Ron LBX
• Segway X260
• Talaria Sting
• E Ride Pro (only fits with aftermarket or modified display mounts)
• FOX 40: 2009+ models
• Marzocchi: 2013+ 888 and 380 models
• RockShox BoXXer: All models
• Manitou Dorado: All models
• Other: Most dual crown downhill/MTB forks (RST Killah, DNM, Fast Ace, etc.)

NOTE: Stem spacers are required if you do not intend to trim your steering tube. Remove the OEM post-mount stem, cut the stem down, and use the OEM stem spacer to set headset preload. Torque specs: riser mounting bolts to triple clamp, 8–12 Nm (6–9 ft-lbs) with blue Loctite. Handlebar clamp bolts, 20 Nm (15 ft-lbs). Many e-motos have been offered with varying equipment, verify fitment with your specific setup before ordering.

Machined from Ti-6Al-4V titanium with a jet wash finish, this riser is lighter than aluminum alternatives while maintaining the strength needed for aggressive riding. The one-piece handlebar clamp and 2" rise position the bars directly over the stem for improved front-end control and rider comfort. If you have successfully installed this part on a setup not listed, contact us so we can update the fitment list.